Attend the spline-based simulation short course, February 19–20, 2020

by | Nov 22, 2019 | News | 0 comments

February 19–20, 2020 at the Coreform offices in Orem, UT

A new highly accurate and performant approach to FEA is to run simulations directly on smooth splines, the building blocks of CAD models. Thousands of academic papers have been published since 2005 investigating this approach. Coreform LLC was formed in 2014 and is 100% focused on commercializing spline-based simulation. We have invented a new unstructured spline type to enable commercial applications. We are also writing Coreform Analyze (beta), a commercial solver natively built to run on a smooth spline basis. In all of these efforts, we are focused on delivering better accuracy in less time, increased robustness, and lower simulation costs, and we are focused on requiring minimal change to commercial workflows.

As commercial interest in smooth spline-based simulation grows, there is increasing demand by early adopters to understand the fundamentals of this type of simulation, and how it compares with traditional finite element analysis. The objective of this two-day short course is to provide a foundation of smooth spline-based simulation theory and applications. Applicants will understand the current state of the art, along with limitations. This course will be unique from other academically focused short courses in the fields of spline-based simulation and isogeometric analysis (IGA) because of its mixture of theory with hands-on application using our Coreform Process preprocessor and Coreform Analyze solver.

Course outline (subject to change):

Day 1: basic theory and analysis-suitable geometry

  • Overview of splines in CAD and FEA
  • Bézier extraction, projection, and adaptivity
  • An introduction to U-splines
  • Fundamentals of spline-based simulation and isogeometric analysis
  • Isogeometric finite element formulations
  • Applications in structural analysis

Day 2: applications

Application-specific theory and hands-on exercises with the Coreform Process preprocessor and Coreform Analyze smooth-spline solver, including

  • NAFEMS benchmarks
  • Contact
  • Stress
  • Non-manifold shell problems

At the conclusion of the training, participants will receive extended access to Coreform Process to continue to have access to the simulations they ran during the short course and to continue to run their own simulation problems.

Register now

Registration costs $999 per person. Early registration is $499 until December 20, 2019. Email sales@coreform.com to register or if you have questions.

Registration cost includes a copy of the training materials, extended access to Coreform Process beta, and dinner on February 19, 2020.

Course instructors

Dr. Michael Scott, Dr. Michael Borden, Dr. Derek Thomas, Dr. Kevin Tew, Dr. Florian Maurin, and other Coreform staff.

Location

The short course will be held at the Coreform office at 1427 South 550 East Orem, UT 84097. The Coreform office is a 50-minute drive from the Salt Lake City International Airport. There are a number of hotels near the Coreform office.

Try Coreform Cubit for yourself

See for yourself why Coreform Cubit is the pre-processor of choice of engineers worldwide. Try Coreform Cubit on your own models free for 30 days.

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *