Coreform news

Corvid announces partnership with Coreform

Corvid Technologies LLC announces a new partnership with Coreform. Coreform Cubit will be the preferred preprocessor for Velodyne.

Published: 27 January 2022

Corvid Technologies LLC, the provider of Velodyne, a high-fidelity, multi-physics, multi-numerics, hydro-structural solver, announces a new partnership with Coreform, the developer of Coreform Cubit preprocessor.

Coreform President Dr. Michael Scott and Coreform Senior Advisor Thomas J.R. Hughes recognized on Highly Cited Researchers 2021 List

Published: 5 January 2022

Coreform President Dr. Michael Scott and Coreform Senior Advisor Thomas J.R. Hughes have been included in the prestigious annual Highly Cited Researchers™ 2021 list from Clarivate as “Cross-field” researchers, which indicates extraordinary influence in more than one field.

Webinar: refinement studies with Python scripting in Coreform Cubit (in OpenCFS)

Published: 14 December 2021

Coreform is offering a free webinar on January 13, 2022 (9 am MST) to demonstrate how to use Coreform Cubit and Python scripting to set up and run a refinement study.

Coreform releases IGA technology in Coreform Cubit

OREM, UTAH — Coreform LLC, developer of next-generation computer-aided engineering software, announces the commercial release of its U-spline isogeometric analysis (IGA) modeling technology, now available in Coreform Cubit.

Published: 18 November 2021

Coreform LLC, the fastest-growing computer-aided engineering company on the Inc. 5000 2021, is releasing historic new technology in their latest version of Coreform Cubit.

Three webinars introducing new features in Coreform Cubit

Our latest Coreform Cubit release introduces significant new functionality. We are pleased to announce three free webinars to walk you through them.

Published: 11 November 2021

The first webinar, IGA model preparation in Coreform Cubit, will be hosted at 9:00 AM (MT) November 18, 2021. Coreform Director of Product Development Greg Vernon will show how to create U-spline IGA models in Coreform Cubit and prepare them for simulation in IGA-enabled solvers such as LS-DYNA and Coreform IGA.

Coreform recognized as #22 in Utah 100 list of fastest-growing companies

OREM, UTAH — Coreform LLC, developer of next-generation computer-aided engineering (CAE) software, is again the fastest-growing CAE company in Utah.

Published: 18 October 2021

MountainWest Capital Network (MWCN) announced its 2021 winners at an event on October 12th, and Orem-based Coreform ranked #22, the highest-ranking computer-aided engineering (CAE) software company in Utah.

Annual isogeometric analysis conference

Virtual conference will include updates from leading global researchers in IGA

Published: 26 September 2021

The annual IGA conference is fully virtual in 2021. This week, Coreform Senior Advisor Dr. Tom Hughes will keynote the Virtual Isogeometric Analysis Conference, and Coreform Director of Product Management Greg Vernon will present the latest updates on Coreform IGA in an industrial session of the conference.

Coreform LLC is fastest-growing CAE company in 2021 Inc. 5000

For the second straight year, Coreform appears on the Inc. 5000, ranking No. 699

Published: 15 September 2021

Coreform is No. 699 on the annual Inc. 5000 list, the most prestigious ranking of the nation’s fastest-growing private companies. The list represents a unique look at the most successful companies within the American economy’s most dynamic segment—its independent small businesses.

Coreform Cubit: strategies for solving tricky meshing problems

Live answers to common meshing questions from a Cubit expert

Published: 14 September 2021

In this webinar, Coreform Cubit expert Greg Vernon will respond live to questions from the Coreform Cubit forum. In advance of the webinar, users are invited to post their Cubit-related questions on the Coreform Cubit forum, and voice their support for the questions they are most interested in seeing answered live.

Coreform IGA: Enabling Commercial Application of IGA

Presented at the 16th U.S. National Congress on Computational Mechanics, within the Industrial Applications of IGA technical session on July 28, 2021.

Published: 4 August 2021

Coreform is developing a new isogeometric analysis solver, called Coreform IGA, based on our U-spline and Flex IGA technologies. We have been developing a full-stack suite of tools to bring the power of IGA to end-users, not just to IGA researchers.

Coreform Cubit Basics: Hex Meshing Fundamentals

Learning to use webcutting, imprint, and merge

Published: 30 July 2021

Coreform Cubit is used across industries for advanced meshing for challenging simulations. Coreform Cubit is especially well-known for its hexahedral (hex) meshing functionality.

Geomechanics simulation with Irazu and Coreform Cubit

Omid Mahabadi, President and CEO of Geomechanica Inc., will offer a demonstration of the use of Coreform Cubit to generate a mesh for geomechanics and show how it is used with Geomechanica's Irazu software.

Published: 4 June 2021

Coreform Cubit is a mesher and simulation preprocessor widely compatible with simulation codes across industries. Geomechanics is one industry where Coreform Cubit is heavily used, and the Irazu software produced by Geomechanica Inc.

Introduction to Coreform Cubit

Using tools, preparing a hex mesh, and everything else you need to know to get started with Coreform Cubit

Published: 18 May 2021

On Friday, June 18th at 10am MDT, Coreform Director of Product Management Greg Vernon will introduce how the Coreform Cubit meshing software can generate high quality meshes for engineering simulation to accelerate your product development and reduce costs.

Coreform Cubit 2021.4

Cubit 2021.4 has officially been released, featuring bug fixes and improved access to functionality

Published: 22 April 2021

Cubit 2021.4 Cubit 2021.3 contained several critical packaging and installation issues for Linux users, stemming from new functionality we recently added to Coreform Cubit.

Predicting the onset of failure with Coreform IGA

Using isogeometric analysis to reduce overall time to solution without sacrificing accuracy

Published: 14 April 2021

On Tuesday, May 12th at 10am MDT, Coreform Director of Product Management Greg Vernon will demonstrate how Coreform’s isogeometric analysis solver, Coreform IGA, can predict failure onset of a mechanical part.